Wardogs Setup Guide

Welcome to Chod’s Cheats.

This guide walks you through the full Wardogs setup process, including system requirements, USB preparation, account access, and the injection process.

Follow each step carefully. Most setup problems are caused by skipped steps, incorrect preparation, or launching at the wrong point in the process.

---

⚠️ Before You Start

Before downloading or launching anything:

• Check that Wardogs is currently Online on the Chod’s Cheats status page.
• Make sure you are running a supported version of Windows.
• Prepare a suitable FAT32 USB drive.
• Make sure Wardogs itself is fully updated.
• Close unnecessary background applications before starting.

If Wardogs has recently received an update, check the product status before attempting to launch.

---

🧱 Requirements

Before starting, make sure your system meets the following requirements:

• Windows 10 64-bit or Windows 11 64-bit
• USB drive formatted as FAT32
• Current stable version of Wardogs
• Antivirus / Windows Defender disabled during setup and use where required by the loader
• Active Wardogs access on your Chod’s Cheats account

Important

Development, test, beta, or otherwise unsupported game builds may cause injection failures, crashes, or other unexpected behaviour.

Always use the currently supported stable build unless the product page or support team says otherwise.

---

⚙️ USB Preparation

The Wardogs loader must be run from a properly formatted USB drive.

1. Insert your USB drive.

2. Open File Explorer.

3. Right-click the USB drive and select Properties.

4. Confirm that the file system is:

   FAT32

If the USB is not FAT32:

1. Back up anything you need from the drive.
2. Right-click the USB drive.
3. Select Format.
4. Choose FAT32.
5. Leave Quick Format enabled.
6. Start the format.

⚠️ Formatting a USB drive erases its existing contents. Back up anything important first.

Once formatted, leave the USB connected.

---

🔐 Account & Access

Wardogs access is tied to your Chod’s Cheats account.

There is no separate licence key to enter manually.

Once your purchase has been successfully processed:

• Wardogs will appear in your account.
• Your product access will activate automatically.
• The loader/download will become available from your customer area.

👉 Open your Member Area and locate your Wardogs licence before continuing.

---

⬇️ Download & Setup

1. Sign in to your Chod’s Cheats account.
2. Open your Member Area.
3. Locate your Wardogs product.
4. Click Download Client.
5. Save the downloaded loader directly to the root of your FAT32 USB drive.
6. Run the loader from the USB drive.

Do not move the loader onto another drive unless instructed to do so by support.

---

🔑 Logging In

When the loader opens:

1. Enter the email address associated with your Chod’s Cheats account.
2. Enter your account password.
3. Make sure both are entered exactly as they appear on your account.

Use your email address and password, not a username.

Access Denied

If you receive an Access Denied or incorrect login message:

• Double-check your email address.
• Re-enter your password manually.
• Make sure the product is active on your account.
• Avoid unusual/non-ASCII characters in your password if the loader reports an authentication issue.
• Restart the loader and try again.

If the problem continues, contact support.

---

⚡ Injection Process

Once you are successfully logged into the loader:

1. Select Wardogs from the available products.
2. Leave the default 60-second injection timer unless you know your system requires longer.
3. Start the injection process.
4. Do not launch Wardogs yet.
5. Wait for the loader to confirm that it is ready.
6. Launch Wardogs.
7. Allow the game process to start normally.
8. Injection will occur once the required game process is detected.
9. The USB drive may be ejected automatically after the process completes.

If the loader ejects the USB successfully, you may physically remove it.

---

🎮 Launching Wardogs

After starting the injection process:

1. Launch Wardogs normally.
2. Skip any unnecessary intro sequences where possible.
3. Allow the game to reach its main menu.
4. Keep the game focused while the injection timer is running.

Slow-loading systems

If Wardogs does not reach the required point before the injection timer expires:

• Restart the process.
• Increase the injection timer.
• Try again.

Do not repeatedly inject into the same session if the first attempt failed unexpectedly. Restarting before retrying is usually the cleaner option.

---

🧠 During Injection

While the injection process is taking place:

• Keep Wardogs focused.
• Do not alt-tab unnecessarily.
• Do not launch unrelated applications.
• Allow the loader and game to complete the process uninterrupted.

Once injection completes successfully, the Wardogs interface should become available.

---

🖥️ Using the Menu

Press:

INSERT

to open or close the Wardogs interface.

Laptop users

Depending on your keyboard layout, you may need to use:

FN + Insert

or the equivalent Insert function on your keyboard.

Once the interface is open, configure the available Wardogs options to your preference.

---

💾 Configuration

Where configuration saving is supported, you can save your preferred settings and reload them in future sessions.

This allows you to:

• Create your preferred setup once.
• Avoid configuring everything again each session.
• Maintain consistent settings between launches.

If a particular Wardogs build does not offer configuration saving, this is intentional for that version.

---

✅ After Injection

Once Wardogs has loaded successfully:

• Open the interface.
• Adjust settings gradually.
• Confirm each option behaves as expected.
• Avoid changing large numbers of settings simultaneously during your first session.

Taking a few minutes to configure the product carefully makes troubleshooting much easier if anything needs adjusting later.

---

🔁 Restart Requirement

We recommend restarting your PC before moving on to other games or products after using Wardogs.

A restart:

• Clears the current session from memory.
• Reduces the chance of conflicts with other software.
• Gives you a clean environment for your next session.

If support specifically instructs you to restart before retrying Wardogs, make sure you do so before attempting another injection.

---

❗ Common Issues

Access Denied

Check:

• Your email address is correct.
• Your password is correct.
• Wardogs is active on your account.
• You are using the correct account.
• Your password does not contain characters the loader cannot process.

Restart the loader after making any changes.

---

Injection Failed

Common causes include:

• Injection timer was too short.
• Wardogs did not load quickly enough.
• The game was launched too early.
• The game version has recently changed.
• Wardogs is currently updating.
• A required setup step was skipped.

Check the live Wardogs status before retrying.

---

Game Crashes During Injection

Possible causes include:

• Unsupported or recently updated game version.
• Incorrect injection timing.
• Missing setup requirements.
• Antivirus interference.
• Other software interfering with the process.

Restart the PC and go through the setup again from the beginning.

If crashes continue, open a support ticket rather than repeatedly attempting injection.

---

Loader Won't Open

Check that:

• The loader is being run from your FAT32 USB drive.
• Antivirus or Windows Defender has not quarantined the file.
• Your Windows version is supported.
• You have downloaded the latest client from your account.

If Windows has removed or quarantined the loader, restore/download it again after checking your security settings.

---

❓ FAQ

Do I need a USB drive?

Yes. Wardogs currently requires the loader to be run from a FAT32-formatted USB drive.

---

Which versions of Windows are supported?

Wardogs currently supports 64-bit Windows 10 and Windows 11.

Always check the Wardogs product page for the latest compatibility information before purchasing or setting up.

---

Should I check the product status before launching?

Yes.

Always check the Wardogs status before attempting to use the product, particularly after a Wardogs update.

If the product is marked Updating, Paused, or Offline, wait until its status returns to Online before attempting to launch.

---

Can I inject more than once without restarting?

It may be possible, but repeated injection attempts in the same session can cause instability.

If an injection fails or Wardogs behaves unexpectedly, restarting the PC before trying again is recommended.

---

What if my PC takes longer than 60 seconds to load Wardogs?

Increase the injection timer before your next attempt.

The game needs enough time to reach the required stage before the timer expires.

---

Do I need technical experience?

No.

The process is designed to be straightforward:

1. Prepare the USB.
2. Download the loader.
3. Sign in.
4. Select Wardogs.
5. Start the injection.
6. Launch the game when instructed.

If something does not work as expected, check this guide and the live product status before contacting support.

---

Where can I get help?

If you have followed the guide and are still experiencing problems:

• Check the Wardogs live status.
• Review the troubleshooting steps above.
• Open a support ticket through your Chod’s Cheats account.
• Join the Chod’s Cheats community on Discord if appropriate.

When contacting support, include:

• Wardogs as the product.
• Your Windows version.
• The step where the problem occurs.
• The exact error message, if one appears.

This makes diagnosing the issue much quicker.

---

🧠 Final Notes

For the most consistent Wardogs setup:

• Use a supported version of Windows.
• Use a correctly formatted FAT32 USB drive.
• Download the latest loader from your account.
• Check Wardogs is Online before launching.
• Follow the injection order carefully.
• Keep the game focused during injection.
• Increase the timer if your system loads slowly.
• Restart before retrying if an injection fails.
• Contact support if the same problem continues.

Following the setup in order will resolve most first-run problems and makes it much easier to diagnose anything that does go wrong.

---

Wardogs

See the Wardogs product page for current pricing, supported Windows versions, requirements, and product information.

Always check the live status page before launching.

If you need further assistance, visit the FAQ or contact support.